Mean Mug Auto 81514-2183A 50x Bumper Fender Clips – 10mm Plastic Rivets – Automotive Fender Liner Retainer Fasteners – Compatible with Honda, Acura – Replaces OEM #: 91503-SZ3-003
Comes with 50 Bumper Fender Rivet Clips per Pack
Join over 100,000 families who actively use Mean Mug Auto parts to keep their vehicles running safely and smoothly.
Mean Mug Auto was founded on the principle that aftermarket auto parts need to be durable, reliable, and, of course, cost-effective.
With our proven manufacturing process, we design auto parts that fit directly into your vehicle.
From computer-aided design to final assembly, each part is carefully inspected by automotive engineers who have a very high standard for auto parts.
Mean Mug Auto 50x Bumper Fender Rivet Clips
Part Number: 81514-2183A
It’s never been easier to repair your vehicle yourself. Whether you’re doing a repair on your bumper, fender, or other body parts, you need rivet clips that you can rely on…every time.
These Mean Mug Auto bumper clips are ready to securely snap into your vehicle. No “modifications” required.
Once these clips are installed, you can trust that they are tough enough to take a beating in the extreme hot summer days and the bitter cold winter nights.
Designed to fit directly into the vehicles listed in the image below. Now you can affordably fix your vehicle without needing the overpriced OEM clips.
Ready to fit snuggly into your vehicle with its 16mm stem length and its 20mm head diameter.
Precision-engineered to push firmly into a 10mm hole and lock into place with its push-type design.
A robust two-piece construction allows these push pin clips to quickly expand, tighten, and firmly hold your vehicle’s body together.
No more struggling with removal. These bumper fastener clips have two indents, on their outer rims, to easily pop off the clips with the leverage of a small flathead screwdriver.
Ruggedly built to last many years with your vehicle. Simply replace your old clips with these clips and never think about it again.
Here’s what you’ll receive: a pack of 50 bumper fender rivet clips.
Replaces OEM Numbers: 91503-SZ3-003, 700080, 700627, 963500, 66003, 19233-9282
Effortlessly Do Your Own Car Repair
Save time and money by doing your own front and back end bodywork.
Simply remove the old worn-out or broken clips from your vehicle, toss them in the trash, and easily push these Mean Mug Auto clips into place.
That’s right. No “modifications” required to get them to work.
First, find the 10mm hole that you want to put the clip into. Point the clip down so the pointed side goes in first.
Once the outer base is pressed against your vehicle, just apply pressure with your thumb (on the top of the clip that’s still sticking out) until it can’t go in any further. It’s that simple. Now the clip is fully installed.
You won’t even have to worry about them falling out because the two-piece construction expands the clips to hold your vehicle firmly together.
Along with bumper covers and fenders, these clips could work with other 10mm holes in your vehicle.
Be sure to check the holes in places like the door trim panels, radiator shield, side skirts, under engine cover, splash guard shield, etc.
Heavy-Duty. Built to Withstand the Elements
Drive through rain, shine, hot, or cold. No matter the weather, these Mean Mug Auto clips experience absolutely no loose vibrations.
This is important because they will not rattle out and go missing somewhere along the highway.
Along with that, the rugged construction of these clips makes them long-lasting for the rest of the life of your vehicle.
You might not realize it, but if your vehicle isn’t completely secure around its body, then your fuel economy is at stake.
Think about it. If your vehicle is completely compact and tight, then there’s little to no air slowing it down. Your vehicle can easily cut through the wind and glide along the road in the most efficient way possible.
This is because the air goes along the outside of your vehicle’s body…instead of unexpectedly through “loose” cracks.
Of course, when your vehicle has excellent aerodynamics, the accumulated savings from better fuel economy adds up nicely over the years.
It’s all possible by using structurally sound clips.
A Must-Have Replacement Part to Keep On Hand
With 50 clips per pack, you’ll have plenty of extras to keep in your garage, trunk, or glove compartment.
Even if you lose a few during installation or removal, you’ll have the spares you need to complete the job.
In the event that you need to work on your vehicle again, these Mean Mug Auto clips are designed to be easily removed with the leverage of a thin-flat tool, like a small flathead screwdriver.
When looking at the clip, you’ll notice that the outer rim has two indents. These indents are designed to give you easy access, from different angles, to the separation points built into the clip.
And, since the outer rim of the clip is wide, the clip acts like a “shield” to protect your vehicle when you remove it. Now you can avoid scuffing or mangling the plastic on your vehicle when applying leverage with a tool.
In many cases, these clips are reusable. However, a lot depends on the tool and force used to remove them.
No big deal. You’ll have plenty of spare clips.
Designed to Directly Fit the Vehicles Listed in the Image Below to Affordably Fix Your Vehicle
Size and Quality : These are Precision-Engineered to push firmly into a 10 mm hole and lock into place with their push-type design. They are ready to fit snuggly into your vehicle with their 16 mm stem length and 20 mm head diameter. Material is Non-Corrosive and Anti-Wear which gives them long life.
Honda Compatible Models : 91503-SZ3-003 Clips Fit for Honda Models : Accord 2001-2014 | Civic 1997-2014 | CL 2001-2003 | CRV 1999-2014 | CRZ 2001| Element 2003-2001 | Fit 2007-2014 | Insight 2000-2014 | Odyssey 1996-2014 | Pilot 2003-2014 | Prelude 1997-2001 | S2000 2000-2009 | Ridgeline 2006-2014
Acura Compatible Models : 91503-sz3-003 Fit for Acura Models : Integra 1996-2001 | MDX 2001-2014 | NSX 1997-2005 | RDX 2007-2014 | RL 1996-2012 | RSX 2002-2006 | TL 1997-2014 | TSX 2004-2014 | ZDX 2010
OEM Replacement Part Numbers : These Automotive Push Pin type clips can be fit for OEM numbers : 91503-SZ3-003, 700080, 700627, 963500, 66003, 19233-9282, 91503 sz3 003 Honda, Acura Bumper Fender Clips and Fasteners. They can be used for Bumper, Door trim, Fender, Radiator shield yoke, grille, Side Skirt, Splash Shield and Engine Cover Retainers
Package Includes : 50 PCS bumper fender rivet clips, with warranty. Just replace your old bumper fender clips and never think about it again.
(as of Nov 29,2021 11:37:24 UTC – Details)